2751 Fiberglass Sleeving Coated With Silicone Rubber

2751 Fiberglass Sleeving Coated With Silicone Rubber


2751 silicone rubber tube sleeve is woven with non-alkali fiberglass yarn, and then coated with silicon rubber under the high temperature.
Silicone rubber fiberglass sleeving owns resistance, superior elasticity, cold endurance and antiaging properties, can be used for the insulating protection of motor and electrical equipments with higher request.
Generic properties:
Fiberglass sleeving Color: original color is straw yellow, other colors is also available according to request.
2 Fiberglass sleeving Outer appearance: the surface is smooth, without defects that maybe affect the properties of the products.
Technoloty Data of Silicone rubber fiberglass sleeve
No.
Properties
Unit
Values
1
Flexural strength perpendicular to laminations
MPa
≥340
2
Impact strength parallel to laminations (Charpy)
KJ/m²
≥33
3
Insulation resistance after immersion in water
Ī©
≥5.0×108
4
Dielectric strength perpendicular to laminations
MV/m
41.2
5
Breakdown voltage parallel to laminations
kv
40
6
Permittivity (50HZ)
/
5.5
7
Dissipation Factor (50HZ)
/
0.04
8
Water Absorption (D-24/23, 1.6mm in thickness)
mg
≤19
9
Density
g/m³
1.7-1.9

Comments

Popular posts from this blog

Rectifier Phase Shift Transformer

3520 Phenolic Paper Tube

Phase Shift Rectifier Oil Type Power Transformer